subject
Engineering, 18.11.2019 21:31 jarteria0

Aerobic pond is used as a secondary wastewater treatment operation for small communities. the pond is usually shallow enough so that it can be assumed as a well-mixed aerobic reactor.
the inflow rate of wastewater entering a 200m^3-aerobic pond is 50 m^3/d and has a substrate (so) concentration of 95 mg bod5/l.
the microbe concentration (xo) in the influent is small and can be neglected. the microbial growth and substrate consumption in the pond can be described by the monod equations:

a) assuming the pond is in steady state, write mass balance equation for the microorganism concentration (x) and solve the equation to derive an expression for the substrate (s) concentration as a function of the hydraulic detention time. calculate s using the equation you derived. (ks=60 mgbod5/l, y=0.6 mg vss/mg bod5, k_d=0.06 day-1, mu_m=3 day-1)

b) write the mass balance equation for the substrate in the pond and solve it for the microbe concentration (x) as a function of the substrate concentration and hydraulic detention time. calculate x using the equation you derived.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
Aerobic pond is used as a secondary wastewater treatment operation for small communities. the pond i...
Questions
question
Mathematics, 19.12.2021 02:20
question
Mathematics, 19.12.2021 02:20
question
Mathematics, 19.12.2021 02:20