Engineering, 17.11.2019 03:31 dee024
Asimple supported beam at x0 = 0 and xn = l with a uniform load w and the
vertical deflection v(x) is described by the boundary value problem
d
2
v
dx2
=
xâl
3ei
wx, v(0) = 5, v(l) = 100
where l is the length of the beam, e represents the youngâs modulus of the material from which
the beam is fabricated and i is the second moment of area of the beamâs crossâsection. suppose
l = 15 m, e = 210 kn/m
2
, i = 370.5 m2
and w = 9.8 kn/m. use the shooting method to
approximate the vertical deflection, v(x) with the step size, h = 3, the first guess, z0 = 10 and
the second guess, z0 = 5.
Answers: 2
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Asimple supported beam at x0 = 0 and xn = l with a uniform load w and the
vertical defle...
vertical defle...
Mathematics, 16.10.2020 23:01
Mathematics, 16.10.2020 23:01
Arts, 16.10.2020 23:01
History, 16.10.2020 23:01
Mathematics, 16.10.2020 23:01
Mathematics, 16.10.2020 23:01
Mathematics, 16.10.2020 23:01
Mathematics, 16.10.2020 23:01
Mathematics, 16.10.2020 23:01
English, 16.10.2020 23:01