subject
Engineering, 15.11.2019 05:31 imatrueguyp612be

Aheat engine receives heat from a heat source at 1200°c and has a thermal efficiency of 40 percent. the heat engine does maximum work equal to 500 kj. determine the heat supplied to the heat engine by the heat source, the heat rejected to the heat sink, and the temperature of heat sink.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
You know the right answer?
Aheat engine receives heat from a heat source at 1200°c and has a thermal efficiency of 40 percent....
Questions
question
History, 26.01.2021 22:30
question
Spanish, 26.01.2021 22:30
question
Social Studies, 26.01.2021 22:30
question
History, 26.01.2021 22:30