subject
Engineering, 14.11.2019 20:31 loveuncondition

Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater. superheated vapor enters the turbine at 10 mpa, 480 c and the condenser pressure is 6 kpa. steam expands through the first stage turbine where some is extracted and diverted to a closed feedwater heater at 0.7 mpa. condensate drains from the feedwater heater as saturated liquid at 0.7 mpa and is trapped into the condenser. the feedwater leaves the heater at 10 mpa and a temperature equal to the saturation temperature at 0.7 mpa.

for the cycle of problem 8.49, reconsider the analysis assuming the pump and each turbine stage have isentropic efficiencies of 80%.

determine:

a) the rate of heat transfer to the working fluid passing through the steam generator in kj per kg of steam entering the first stage turbine.

b) the thermal efficiency

c) the rate of heat transfer from the working fluid passing through the condenser to the cooling water in kj per kg of steam entering the first stage turbine.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Water is the working fluid in an ideal regenerative rankine cycle with one closed feedwater heater....
Questions
question
Mathematics, 21.08.2020 20:01
question
Mathematics, 21.08.2020 20:01
question
Chemistry, 21.08.2020 20:01
question
Health, 21.08.2020 20:01
question
Health, 21.08.2020 20:01