subject
Engineering, 14.11.2019 01:31 victoriahuntley12148

An engineer is studying the mileage performance characteristics of five types of gasoline additives. in the road test he wishes to use cars as blocks; however, because of a time constraint, he must use an incomplete block design. he runs the balanced design with the five blocks that follow. analyze the data from this experiment (use α-0.05) and draw conclusions.

car

additive 1 2 3 4 5

1 17 14 13 12

2 14 14 13 10

3 12 13 12 9

4 13 11 11 12

5 11 12 10 8

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
An engineer is studying the mileage performance characteristics of five types of gasoline additives....
Questions
question
Computers and Technology, 14.10.2019 20:00