Engineering, 13.11.2019 23:31 sydneyfarrimonp9k3j4
If a manufacturer’s specifications for a pm dc motor are as follows, what are the motor’s no-load speed, stall current, starting torque, and maximum power for an applied voltage of 10 v?
a. torque constant 0.12 nm/a .
b. electrical constant 12 v/1000 rpm .
c. armature resistance 1.5ohm.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
If a manufacturer’s specifications for a pm dc motor are as follows, what are the motor’s no-load sp...
Questions
Chemistry, 19.03.2020 07:24
Mathematics, 19.03.2020 07:24
English, 19.03.2020 07:25
