Suppose that a wing component on an aircraft is fabricated from an aluminum alloy that has a plane strain fracture toughness of 40 mpa √m (36.4 ksi √ it has been determined that fracture results at a stress of 365 mpa (53,000 psi) when the maximum internal crack length is 2.5 mm (0.10 for this same component and alloy, compute the stress level at which fracture will occur for a critical internal crack length of 4.0 mm (0.16

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.