Engineering, 13.11.2019 19:31 mmelody5
Athree-phase, four-pole winding is installed in 12 slots on a stator. there are 40 turns of wire in each slot of the windings. all coils in each phase are connected in series, and the three phases are connected in delta. the flux per pole in the machine is 0.060 wb, and the speed of rotation of the magnetic field is 1800 r/min.
a. what is the frequency of the voltage produced in this winding?
b. what are the resulting phase and terminal voltages of this stator?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
Athree-phase, four-pole winding is installed in 12 slots on a stator. there are 40 turns of wire in...
Questions
Arts, 31.07.2019 06:00
English, 31.07.2019 06:00
History, 31.07.2019 06:00
Mathematics, 31.07.2019 06:00
Physics, 31.07.2019 06:00
