subject
Engineering, 13.11.2019 05:31 khanaamnaa539

Ahousehold refrigerator that has a power input of 200 w and a cop of 1.3 is to cool 7 cucumbers, 0.3 kg each, to 9 °c. if the cucumbers are initially at 25°c, determine how long it will take for the refrigerator to cool them. the cucumbers can be treated as water whose specific heat is 4.2 kj/kg-°c. a. draw a schematic representation of the system with all the energy interactions involved. (3pts) b. calculate the amount of heat that needs to be removed from the cucumbers, in kl. (hint: use the specific heat) (3 pts) c. calculate the heat rejection rate (qh) of the refrigerator. (3 pts) d. calculate the time required to cool the cucumbers at the desired temperature.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:20
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
You know the right answer?
Ahousehold refrigerator that has a power input of 200 w and a cop of 1.3 is to cool 7 cucumbers, 0.3...
Questions