Engineering, 13.11.2019 01:31 chayaharroch03

For the data give below, calculate and plot pressure traverse in the tubing string using the hagedorn-brown correlation tubing shoe depth: 6,000 ft tubing inner diameter: 1.995 in. oil gravity: 30api oil viscosity: 2 cp production glr: 500 scf/bbl gas-specific gravity: 0.65 air=1 flowing tubing head pressure 100 psi flowing tubing head temperature 80f flowing temperature at tubing shoe: 140f liquid production rate: 1,500 stb/day water cut: 20% interfacial tension: 30 dynes/cm specific gravity of brine: 1.05 h2o=1 also construction the tpr curve for the well.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.

Answers: 2

Answer

You know the right answer?

For the data give below, calculate and plot pressure traverse in the tubing string using the hagedor...

Questions