subject
Engineering, 12.11.2019 04:31 boweytom6217

Athree-point transverse bending test is conducted on a cylindrical specimen of aluminum oxide having a reported flexural strength of 390 mpa (56,600 psi). if the specimen radius is 2.5 mm (0.10 in.) and the support point separation distance is 30 mm (1.2 predict whether or not you would expect the specimen to fracture when a load of 620 n (140 lbf) is applied. calculate the value of flexural strength for this test.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
question
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
question
Engineering, 06.07.2019 03:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 1
You know the right answer?
Athree-point transverse bending test is conducted on a cylindrical specimen of aluminum oxide having...
Questions
question
Mathematics, 10.11.2021 01:00
question
Health, 10.11.2021 01:00
question
Computers and Technology, 10.11.2021 01:00
question
World Languages, 10.11.2021 01:00
question
Mathematics, 10.11.2021 01:00
question
Mathematics, 10.11.2021 01:00
question
Computers and Technology, 10.11.2021 01:00
question
Advanced Placement (AP), 10.11.2021 01:00