subject
Engineering, 10.11.2019 05:31 coricori8

Metal plates (k = 185 w/m · °c; density = 2800 kg/m3; cp = 900 j/kg °c) with a thickness of 1 cm are being heated in an oven for 2 minutes. air in the oven is maintained at 850°c with a convection heat transfer coefficient of 250 w/m2 · °c. if the initial temperature of the plates is 25°c, determine the temperature of the plates when they are removed from the oven. will you show each step fully so i can see exactly how you go the answer. i. e lc=v/as. i could not figure out how to get the volume or the area with the information provided.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 06.07.2019 03:20
What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.
Answers: 3
You know the right answer?
Metal plates (k = 185 w/m · °c; density = 2800 kg/m3; cp = 900 j/kg °c) with a thickness of 1 cm a...
Questions
question
Mathematics, 21.10.2021 01:00
question
Physics, 21.10.2021 01:00
question
Mathematics, 21.10.2021 01:00