Many believe that technology is very costly to create, but cheap to transfer. for example, think of the personal computer: the technology underpinning the personal computer took a generation of time and a ton of money to create. however, now that the personal computer has been created, it is easy for others to purchase and reap the benefits. the u. s. has traditionally been more apt to create new technology whereas china has traditionally been more apt to adopt technologies created elsewhere. these observations imply that growth:

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.