Engineering, 09.11.2019 03:31 deyii2030
Complex poles and zeros. sketch the straight-line asymptotes of the bode magnitude and phase plots for the following open-loop transfer function, and approximate the transition at the second-order break point based on the value of the damping ratio. after completing the hand sketches, verify your result using matlab. l(s) = 1/(s^2 + 3s + 10)l(s) = (s^2 + 4)/s(s^2 + 1)
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
You know the right answer?
Complex poles and zeros. sketch the straight-line asymptotes of the bode magnitude and phase plots f...
Questions
Biology, 13.05.2021 22:30
Chemistry, 13.05.2021 22:40
Mathematics, 13.05.2021 22:40
Computers and Technology, 13.05.2021 22:40
Social Studies, 13.05.2021 22:40
English, 13.05.2021 22:40
