Compute the components of the deformation gradient matrix f associated with the following motions, and then calculate the corresponding values of lagrangian (green) strain tensor e and infinitesimal strain tensor e. for each case, give an estimate on how closely the infinitesimal assumption could capture the deformation. you can do this by plotting the strain measures as a function of the corresponding stretch or shear ratio, and define a threshold where you can capture over a certain percentage (say 80%) of the strain from the linear approximation. (a) x = xx, y=y, 2= 2. (b) r = x + ky, y=y, z = 2. (c) r = x cose + y sin 0, y = -x sin + y cose, 2= z.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2