subject
Engineering, 07.11.2019 20:31 angelakrill14091

Consider a long bar of rectangular cross section and of dimensions a and b in the, and directions, respectively. the thermal conductivity of the material of the bar is direction dependent such that the thermal conductivity in the x direction, k_x, is two times greater than the thermal conductivity in the v direction, k_y. the surfaces at x = 0, x = a and y = 0 are all maintained at a constant temperature t_1, while the surface at y = b is kept at constant t. there are no heat sources or sinks in the bar. give the formulation of the problem for the steady state temperature distribution t(x, y)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
You know the right answer?
Consider a long bar of rectangular cross section and of dimensions a and b in the, and directions, r...
Questions
question
Mathematics, 03.12.2020 05:00
question
Mathematics, 03.12.2020 05:00
question
Mathematics, 03.12.2020 05:00
question
Mathematics, 03.12.2020 05:00