subject
Engineering, 07.11.2019 02:31 Hardydonotmess1

7. a tube bank housing 10mm diameter tubes, st = sl = 20mm, consists of 10 rows of tubes with 50 tubes in each row. cold water flows through the tubes, maintaining the outer surface temperature at 27°c, while hot flue gases at 427°c and a velocity of 5 m/s flow over the tubes. the properties of the flue gas may be approximated as those of atmospheric air at 427°c. what is the total rate of heat transfer per unit length of tubes in the bank? state your assumptions!

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
7. a tube bank housing 10mm diameter tubes, st = sl = 20mm, consists of 10 rows of tubes with 50 tub...
Questions
question
Mathematics, 10.04.2020 19:20
question
Mathematics, 10.04.2020 19:20