Engineering, 04.11.2019 21:31 cookiemonster0476

9. in an afterburning jet engine during a static test, the fluid entering the afterburner has a temperature of 900 k, a pressure of 0.235 mpa and a mass flow rate of 75 kg/s. these conditions are maintained with and without operation of the afterburner. without afterburning, the stagnation pressure loss between afterburner entrance and exit is 3 percent and the specific heat ratio of the fluid in the nozzle is 1.33. when the afterburner is operating, the exit stagnation temperature rises to 1800 k, the stagnation pressure loss changes to 8 percent and the specific heat ratio in the nozzle drops to 1.29. in both cases the nozzle flow is simply converging and choked. determine the required nozzle exit area in both cases.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj

Answers: 2

Answer

Engineering, 04.07.2019 19:20

A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.

Answers: 2

Answer

You know the right answer?

9. in an afterburning jet engine during a static test, the fluid entering the afterburner has a temp...

Questions