Engineering, 01.11.2019 04:31 montgomerykarloxc24x

Asolid stainless steel [g = 12,500 ksi] shaft that is 61 in. long will be subjected to a pure torque of t = 855 lb-in. determine the minimum diameter required if the shear stress must not exceed 7,200 psi and the angle of twist must not exceed 5°. report both the maximum shear stress τ and the angle of twist φ at this minimum diameter. answers: dmin = entry field with incorrect answer .88 in. τ = entry field with incorrect answer psi φ = entry field with incorrect answer °

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

Engineering, 06.07.2019 03:30

Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?

Answers: 1

Answer

You know the right answer?

Asolid stainless steel [g = 12,500 ksi] shaft that is 61 in. long will be subjected to a pure torque...

Questions