subject
Engineering, 28.10.2019 21:31 ShadowShu8658

The walls of a furnace are made of 1.6-ft-thick concrete (k = 0.64 btu/h⋅ft⋅°f and α = 0.023 ft2/h). initially, the furnace and the surrounding air are in thermal equilibrium at 70°f. the furnace is then fired, and the inner surfaces of the furnace are subjected to hot gases at 1800°f with a very large heat transfer coefficient. determine how long it will take for the temperature of the outer surface of the furnace walls to rise to 70.1°f.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
The walls of a furnace are made of 1.6-ft-thick concrete (k = 0.64 btu/h⋅ft⋅°f and α = 0.023 ft2/h)....
Questions
question
Mathematics, 19.02.2020 05:45