Engineering, 25.10.2019 18:43 tristanmatthias3456
Two resistors are to be combined to form an equivalent resistance of 1000 ω. the resistors are taken from available stock on hand as acquired over the years. readily available are two common resistors rated at 500 ± 50 ω and two common resistors rated at 2000 ± 100 ω. (a) calculate the uncertainties for both combinations. (b) what combination of resistors (series or parallel) would provide the smaller uncertainty in an equivalent 1000 ω resistance?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
You know the right answer?
Two resistors are to be combined to form an equivalent resistance of 1000 ω. the resistors are taken...
Questions
Chemistry, 06.03.2020 18:56
Mathematics, 06.03.2020 18:56
Mathematics, 06.03.2020 18:56
