subject
Engineering, 23.10.2019 23:00 allisonpierce1787

The purification of hydrogen gas is possible by diffusion through a thin palladium sheet. calculate the number of kilograms of hydrogen that pass per hour (in kg/h) through a 3.0-mm thick sheet of palladium having an area of 0.25 m2 at 500°c. assume a diffusion coefficient of 6.0 x 10-8 m2/s, that the concentrations at the high- and low-pressure sides of the plate are 3.7 and 0.88 kg/m3 (kilogram of hydrogen per cubic meter of palladium), and that steady-state conditions have been attained.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
The purification of hydrogen gas is possible by diffusion through a thin palladium sheet. calculate...
Questions
question
Mathematics, 19.09.2019 18:30