When analyzing a space truss if the following conditions are met:
(a) members are connected...
Engineering, 19.10.2019 01:30 Jperez6541
When analyzing a space truss if the following conditions are met:
(a) members are connected at the endpoints only,
(b) members are connected by ball socket joints,
(c) external loads/supports are applied at the joints,
(d) can neglect the weight of the members,
then the members are considered:
(a) 6 force members
(b) 2 force members
(c) 4 force members
(d) 3 force members
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
Questions
Biology, 06.05.2020 00:09
English, 06.05.2020 00:09
Mathematics, 06.05.2020 00:09
English, 06.05.2020 00:09
Arts, 06.05.2020 00:09
Biology, 06.05.2020 00:09
