Predict the trajectory of mist particles emitted from a smoke stack, with its top exit location 30m above ground level, to estimate the extent of horizontal travel. conditions are that the particle diameter is 10 m with a density twice that of water, and as it leaves the top of the smoke stack assume a horizontal wind velocity of 30 mph. assume the particle exit velocity is 5 m/s upward as it exits the smoke stack. at the instant it exits the stack assume it is exposed to the horizontal cross wind velocity. (note that the particle does not instantaneously have the same velocity as the cross wind velocity).

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false