subject
Engineering, 18.10.2019 20:30 coolestkid2401

Two streams flow into a 500 us gallon tank. the first stream is 10.0 wt% ethanol and 90.0 wt% hexane and has a density of rho1 = 0.68 g/cm3 . the second stream is 90.0 wt% ethanol and 10.0 wt% hexane and has a density of rho2 = 0.78 g/cm3 . after the tank is filled, which takes 22 min, the mixture is 60.0 wt% ethanol and 40.0 wt% hexane. a) draw and label the diagram for this system. b) estimate the density of the mixed stream. use this density to calculate the final mass of the mixture in the filled tank. c) calculate the mass (in kg/min) and volumetric (in l/min) flow rates of the two streams, assuming that they fill the tank at a constant rate

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
You know the right answer?
Two streams flow into a 500 us gallon tank. the first stream is 10.0 wt% ethanol and 90.0 wt% hexane...
Questions