Engineering, 16.10.2019 00:00 lexis1446
A2 inch axle is driving a 12 inch wheel. the resistance force of the wheel is 75 ibs. how much effort force must be applied to the axel?
what's the ideal mechanical advantage of the wheel and axel?
a moveable pulley is used to lift an object that weighs 100 ibs. what's the ideal mechanical advantage of the pulley?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A2 inch axle is driving a 12 inch wheel. the resistance force of the wheel is 75 ibs. how much effor...
Questions
Chemistry, 23.07.2019 04:30
Mathematics, 23.07.2019 04:30
Social Studies, 23.07.2019 04:30
Social Studies, 23.07.2019 04:30
Social Studies, 23.07.2019 04:30
Social Studies, 23.07.2019 04:30
History, 23.07.2019 04:30
Physics, 23.07.2019 04:30
