subject
Engineering, 15.10.2019 17:10 jazmaine1217

Three parallel three-phase loads are supplied from a 480v (line-line rms), 60 hz three-phase supply. the loads are as follows: load 1: a 20hp motor operating at full load, 90% efficiency and a 0.8 lagging power factor. load 2: a balanced resistive load that draws a total of 20kw. load 3: a y-connected capacitor bank with a total rating of 20kvar. what is the total system kw ?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Three parallel three-phase loads are supplied from a 480v (line-line rms), 60 hz three-phase supply....
Questions
question
Mathematics, 29.03.2020 02:35
question
Mathematics, 29.03.2020 02:35