Engineering, 09.10.2019 01:10 klk597703

The hot water pipe leaving a residential water heater is not insulated. the water flowing inside is maintained at 49 °c and has a convection coefficient of 234 w/m2 k. the inside diameter of the copper (400 w/mk) pipe is 0.745 inches; the wall thickness is 0.065 inches. the temperature and the convection coefficient of the air surrounding the pipe are 15 °c and 16 w/m2 k respectively. determine the heat loss per unit length of uninsulated pipe, and the temperature of the outer surface. determine the heat loss and the outermost surface temperature for the same conditions with the pipe insulated using 3/8"-thick insulation whose thermal conductivity is 0.034 w/mk. do the surface temperatures of the copper pipe change with the addition of insulation?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

You know the right answer?

The hot water pipe leaving a residential water heater is not insulated. the water flowing inside is...

Questions