Engineering, 07.10.2019 23:10 nooooooooooooooo412

The composite shaft consists of two steel pipes that are connected at flange b and securely attached to rigid walls at a and c. steel pipe (1) has an outside diameter of 7.75 in., a wall thickness of 2.74 in., and a length of l1 = 16 ft. steel pipe (2) has an outside diameter of 5.75 in., a wall thickness of 1.78 in., and a length of l2 = 22 ft. both pipes have a shear modulus of 13500 ksi. if a concentrated torque of 45 kip-ft is applied to flange b, determine: (a) the maximum shear stress magnitudes τ1, τ2 in pipes (1) and (2). (b) the rotation angle φb/a of flange b relative to support a.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

Answer

You know the right answer?

The composite shaft consists of two steel pipes that are connected at flange b and securely attached...

Questions