Engineering, 07.10.2019 17:30 mfar3457

(7) two pg70 asphalt concrete core samples are taken from an existing flexible pavement. each sample has a diameter of 4 in. and a thickness of 2.5 in. (a) if the first sample, tested in the indirect tensile apparatus, failed under a maximum load of 2,500 lbs, calculate the tensile strength of the pg70 asphalt concrete mixture. (b) under a dynamic load of 50 lbs, applied on the second specimen in the transducer arrangement for the diametral modulus test, a horizontal recoverable deformation of 0.076*10-3 in. is measured at 70o f. what is the resilient modulus of the asphalt concrete (ac) layer in the field (use the equation on page 283)?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

Engineering, 06.07.2019 02:30

An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.

Answers: 1

Answer

You know the right answer?

(7) two pg70 asphalt concrete core samples are taken from an existing flexible pavement. each sample...

Questions