Grows and maintains plants and operates equipment in
greenhouses.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Fluids at rest possess no flow energy. a)- true b)- false

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.