Engineering, 05.10.2019 13:00 Ebberman3410
Acylindrical riser is to be designed for a sand casting mold. the length of the cylinder is to be 1.5 times its diameter. the casting is a square plate, each side = 12 in and thickness = 1.1 in. if the metal is cast iron, and the mold constant = 13.0 min/in2 in chvorinov's rule, determine the length of the riser in inches so that it will take 35% longer for the riser to solidify.
Answers: 2
![TST = Cm [\frac{V}{A}]^2](/tpl/images/0289/6179/137f9.png)
[/tex]
![TST = Cm [\frac{v}{A}]^2[tex]TST= 13 \times (0.1875 D)^2](/tpl/images/0289/6179/fae88.png)
Another question on Engineering
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
Acylindrical riser is to be designed for a sand casting mold. the length of the cylinder is to be 1....
Questions
Biology, 22.08.2019 16:30
English, 22.08.2019 16:30
Mathematics, 22.08.2019 16:30
History, 22.08.2019 16:30
Chemistry, 22.08.2019 16:40
Computers and Technology, 22.08.2019 16:40
History, 22.08.2019 16:40
Mathematics, 22.08.2019 16:40
