Engineering, 01.10.2019 23:10 ineedhelp2285

The heat transfer coefficient for hydrogen flowing over a sphere is to be determined by observing the temperature–time history of a sphere fabricated from pure copper. the sphere, which is 20.0 mm in diameter, is at 80°c before it is inserted into the gas stream having a temperature of 27°c. a thermocouple on the outer surface of the sphere indicates 50°c 97 s after the sphere is inserted into the hydrogen.(a) what is the value of the specific heat of the copper at the average temperature of the process, in j/kg·k? (b) what is the value of the lumped thermal capacitance of the sphere, in j/k? (c) solve for the thermal time constant, in sec.(d) what is the value of the heat transfer coefficient, in w/m2· k? (e) what is the value of the biot number?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

You know the right answer?

The heat transfer coefficient for hydrogen flowing over a sphere is to be determined by observing th...

Questions