subject
Engineering, 01.10.2019 21:30 oryunnis

Water from an open reservoir a at 8m elevation is drawn by a motor driven pump to an open reservoir b at 70 m elevation. the inside diameter of the suction pipe is 200 mm and 150 mm for the discharge pipe. the suction line has a loss of head 3 times that of the velocity head in the in the 200 mm pipe. the discharge line has a loss of head 20 times that of the head in the discharge pipeline. the pump centreline is at 4 m. overall efficiency of the system is 78% for a discharge rate of 10 li/s, find the power input to the motor and the pressure gages reading installed just at the outlet and inlet of the pump in kpag

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
You know the right answer?
Water from an open reservoir a at 8m elevation is drawn by a motor driven pump to an open reservoir...
Questions
question
Mathematics, 10.12.2020 16:40
question
Business, 10.12.2020 16:40