subject
Engineering, 01.10.2019 20:30 priscillarios30

Superheated steam at 20 mpa, 480°c enters the turbine of a vapor power plant. the pressure at the exit of the turbine is 0.5 bar, and liquid leaves the condenser at 0.4 bar at 75°c. the pressure is increased to 20.1 mpa across the pump. the turbine and pump have isentropic efficiencies of 95 and 85%, respectively. cooling water enters the condenser at 20°c with a mass flow rate of 70.7 kg/s and exits the condenser at 38°c. determine the mass flow rate of the steam.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
You know the right answer?
Superheated steam at 20 mpa, 480°c enters the turbine of a vapor power plant. the pressure at the ex...
Questions
question
Mathematics, 26.10.2019 23:43