Engineering, 29.09.2019 02:30 janiadavis35

Agas - turbine power plant operates on the simple brayton cycle between the pressure limits of 100 and 1600 kpa. the working fluid is air, which enters the compressor at 40 c at a rate of 850 m^3/min and leaves the turbine at 650 c. assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 precent, determine (a) the net power output, (b) the back work ratio, and (c) the thermal efficiency. use constant specific heats with cv =.821 kl/kgk , cp = 1.108 kj/khk, and k= 1.35.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

You know the right answer?

Agas - turbine power plant operates on the simple brayton cycle between the pressure limits of 100 a...

Questions