Engineering, 27.09.2019 23:30 thefootballman1115

If the total energy change of an system during a process is 15.5 kj, its change in kinetic energy is -3.5 kj, and its potential energy is unchanged, calculate its change in specificinternal energy if its mass is 5.4 kg. report your answer in kj/kg to one decimal place.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Ahousehold refrigerator operating steadily and with a coefficient of performance of 2.5 removes energy from a refrigerated space at a rate of 650 kj/h. evaluating electricity at $0.06 per kw.h, determine the cost of electricity in a month when the refrigerator operates for 360 hours.

Answers: 3

Answer

You know the right answer?

If the total energy change of an system during a process is 15.5 kj, its change in kinetic energy is...

Questions