Engineering, 19.09.2019 01:30 mustafa455486a

During the cycle, the heat is added into the air in process 2-3, and process 3-4. heat is rejected in process 5-1 only. there is no heat transfer during process 1-2 and process 4-5. so q_in=q_23+q_34, and q_out=q_51. let analyze this thermodynamic cycle. process 3-4: constant pressure with heat addition into the system. (a) define your system and draw a boundary to separate your system and the surroundings. (b) for process 3-4 only, write down the energy conservation equation for the system. (c) if q34 (heat transfer into the system during process 3-4), p3 (pressure at state 3), v3 (volume at state 3) and v4 (volume at state 4) are given, rewrite energy conservation equation for part (b) and find total internal energy change for this process δu34.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

You know the right answer?

During the cycle, the heat is added into the air in process 2-3, and process 3-4. heat is rejected i...

Questions