In the steady state a good weather vane points into the wind, but when the wind shifts, the vane cannot always be trusted to be pointing into the wind. identify inputs, outputs, and the parameters of the weather vane system that affect its response to the wind. sketch your idea of how the position of the vane would change in time if the wind suddenly shifted 10◦ .

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.