subject
Engineering, 16.09.2019 20:20 LilXan420

The voltage value at which a zirconia oxygen sensor switches from rich to lean or from lean to rich is?
a. 0.9v( 900mv)
b. 0.25v (250mv)
c. 0.5 v (500mv)
d. 0.45 v ( 450 mv)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
The voltage value at which a zirconia oxygen sensor switches from rich to lean or from lean to rich...
Questions
question
History, 14.08.2021 20:10
question
Mathematics, 14.08.2021 20:10
question
History, 14.08.2021 20:10
question
Social Studies, 14.08.2021 20:10
question
Advanced Placement (AP), 14.08.2021 20:10