subject
Engineering, 14.09.2019 05:30 treseanthegreat

Air is compressed at 100 kpa and 300 k up to 300 kpa in the first stage of a double stage compressor. at the exit of this first stage the air enters a refrigerator where it cools down to 300 k before entering the second stage of the compressor from which it leaves at 1000 kpa. it considers steady state and that the compression processes are isoentropic. determine: 1. output temperature of the second stage of the compressor (k) and work spent on each stage of the compressor per unit mass (kj / kg). 2. if the compression had been carried out in a single stage, how much greater would have been the work spent by the compressor? (%)3. heat transferred in the refrigerator per unit of mass (kj / kg) and variation of entropy in the refrigerator (j / kg · k). 4. refrigerator pressure value (kpa) corresponding to the minimum work spent by the compressor. 5. find an expression for the total work spent by the compressor per unit mass (kj / kg) based on the refrigerator pressure (assuming the conditions of the compressor's inlet and outlet pressure are known, and with an outlet temperature of refrigerator equal to the compressor inlet). 6. draw all the air states on the p-v and t-s diagrams.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Air is compressed at 100 kpa and 300 k up to 300 kpa in the first stage of a double stage compressor...
Questions
question
Arts, 02.12.2020 01:00
question
English, 02.12.2020 01:00
question
Mathematics, 02.12.2020 01:00
question
Social Studies, 02.12.2020 01:00
question
History, 02.12.2020 01:00
question
Biology, 02.12.2020 01:00