The center distance of two spur gears that have 25° pressure angle and full-depth with diametral pitch of 16 teeth/in, is increased by 0.125 in over the standard center distance. the pinion has 20 teeth and the driven gear has 60 teeth. at what pressure angle do the gears operate now?

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.