Engineering, 14.09.2019 03:30 jenn4887
Abrittle intermetallics specimen is tested with a bending test. the specimen's width 0.45 in and thickness 0.20 in. the length of the specimen between supports 2.5 in. determine the transverse rupture strength if failure occurs at a load 1200 lb.
Answers: 2
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Abrittle intermetallics specimen is tested with a bending test. the specimen's width 0.45 in and thi...
Mathematics, 27.02.2021 07:20
Mathematics, 27.02.2021 07:20
Mathematics, 27.02.2021 07:20
Biology, 27.02.2021 07:20
Mathematics, 27.02.2021 07:20
Biology, 27.02.2021 07:20
Biology, 27.02.2021 07:20
Mathematics, 27.02.2021 07:20
Mathematics, 27.02.2021 07:20
Biology, 27.02.2021 07:30
Mathematics, 27.02.2021 07:30
Biology, 27.02.2021 07:30
Mathematics, 27.02.2021 07:30
Arts, 27.02.2021 07:30
Social Studies, 27.02.2021 07:30