subject
Engineering, 14.09.2019 02:20 benjaminbooth10

Water at a pressure of 15 bar at a temperature of 30°c enters a boiler, where it is heated to 250°c at constant pressure. steam leaving the boiler passes into a throttle which reduces the pressure to 10 bar. the steam is then passed through a small turbine, exiting at atmospheric pressure at 110°c. draw a schematic diagram. 1. how much heat is added per kg to the water by the boiler? 2. find the temperature of the steam leaving the throttle. 3. if the turbine produces 15kw of work, find the mass flowrate of steam through the system.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
You know the right answer?
Water at a pressure of 15 bar at a temperature of 30°c enters a boiler, where it is heated to 250°c...
Questions
question
Health, 07.04.2020 22:32