subject
Engineering, 14.09.2019 01:30 parislover2000

Amotor driven pump draws water from an open reservoir a and lifts to an open reservoir b. suction and discharge pipes are 150 mm pipe and 100 mm inside diameter respectively. the loss of head in the suction line is 3 times the velocity head in the 150 mm pipe and the loss of head in the discharge line is 20 times the velocity head in the 100 mm pipeline.. water level at reservoir a is at elevation 6 meters and that of reservoir b at elevation 75 m. pump centre line is at elevation 2 m. overall efficiency of the system is 73%. discharge is 10 litres/sec. determine the following; a. power input of the motor b. reading in kpa of the pressure gauges installed just at the outlet and inlet of the pump.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
Amotor driven pump draws water from an open reservoir a and lifts to an open reservoir b. suction an...
Questions
question
History, 09.07.2019 22:20