subject
Engineering, 14.09.2019 01:30 conyabrew82

An automatic valve consists of a250 x 250mm
square plate that is pivoted about ahorizontal axis through
a located at a distance h =90mm
above the lower edge. determine the depth ofwater dfor which
thevalve will open.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
You know the right answer?
An automatic valve consists of a250 x 250mm
square plate that is pivoted about ahorizontal axi...
Questions
question
Mathematics, 19.02.2021 01:00
question
Computers and Technology, 19.02.2021 01:00
question
Business, 19.02.2021 01:00
question
English, 19.02.2021 01:00
question
Social Studies, 19.02.2021 01:00
question
Mathematics, 19.02.2021 01:00