Engineering, 13.09.2019 23:30 lamashermosa23

Acaliper brake is required for the front wheels of a passenger car with a braking capacity of 500 nm for each brake. preliminary design estimates have set the brake geometry as ri = 110 mm1 and θ = 43°. pads with a coefficient of friction of 0.38 have been selected. each pad is actuated by means of a hydraulic cylinder of nominal diameter 25.4 mm. determine: a)- the required actuating force, b)- the average and the maximum contact pressures, c)- the required hydraulic pressure for brake actuation. take the outer radius of the brake to be that of the bugatti chiron. (420.0 mm front brake diameter 400.0mm rear brake diameter)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

You know the right answer?

Acaliper brake is required for the front wheels of a passenger car with a braking capacity of 500 nm...

Questions