Engineering, 13.09.2019 23:30 ladya1613

Complete the demonstration of the equivalence of the clausius and kelvin-planck statements of the second law given in sec. 5.2 by showing that a violation of the kelvin-planck statement implies a violation of the clausius statement. an inventor claims to have developed a device that undergoes a thermodynamic cycle while communicating thermally with two reservoirs. the system receives energy q c from the cold reservoir and discharges energy q h to the hot reservoir while delivering a net amount of work to its surroundings. there are no other energy transfers between the device and its surroundings. evaluate the inventor's claim using (a) the clausius statement of the second law, and (b) the kelvin-planck statement of the second law.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

You know the right answer?

Complete the demonstration of the equivalence of the clausius and kelvin-planck statements of the se...

Questions