Engineering, 13.09.2019 23:30 budjasdatazaki467
Asteam power plant operates on an ideal regenerative rankine cycle with one open feedwater heater operating at 0.125 mpa. steam enters the first turbine stage at 15 mpa, 600 oc. condensate exiting the feedwater as saturated liquid at 0.125 mpa. the condenser pressure is 2.5 kpa. for isentropic processes in the two turbine stages and the pump, determine the followings: a) the net work of the cycle in kj/kg; b) the mass flow rate into the first-stage turbine, in kg-hr, if the net power developed for this power plant is 212 mw. c) the heat transfer into the working fluid through the boiler in kj/kg; d) the thermal efficiency of the cycle in %.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Asteam power plant operates on an ideal regenerative rankine cycle with one open feedwater heater op...
Mathematics, 21.05.2021 17:20
Computers and Technology, 21.05.2021 17:20
Social Studies, 21.05.2021 17:20
Mathematics, 21.05.2021 17:20
Mathematics, 21.05.2021 17:20