subject
Engineering, 13.09.2019 22:30 davidb1113

Fermentation of starch and sugar crops yields 5% to 20% molar volume of ethanol in water, which is too wet to burn. distillation of this mixture to remove water produces a mixture of 95% ethanol and 5% water, the azeotrope of the mixture, which is called hydrous ethanol. detydration to anhydrous ethanol, which is 99.7% pure ethanol and is the standard for blending with gasoline in the u. s., requires additional processing and costs. in brazil most vehicles are flex fuel vehicles of a different design that flex fuel vehicles in the u. s., in that they can burn straight hydrous ethanol (no gasoline) as well as any mixtures of gasoline and hydrous ethanol 1a) calculate the enthalpy change when oxidizing (burning) pure ethanol in air if the initial temperature is at 25c and the exhaust temperatures is 6ook. 1b) recalculate the enthalpy change for a hydrous ethanol mixture of 95% ethanol and 5% water. assume the 95: 5 mixture of ethanol and water is on a mass basis.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
Fermentation of starch and sugar crops yields 5% to 20% molar volume of ethanol in water, which is t...
Questions
question
English, 11.11.2019 22:31
question
English, 11.11.2019 22:31